154 Setting up the charging station
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
Setting up the charging station
The charging station must be connected to a power
source.
When setting up the charging station, ensure that it is
placed where it is easily accessible and within sufficient
distance of a power outlet.
i
the charging station should not be located in
direct sunlight, or where it might be easily
knocked over, causing the instrument to fall out.
u Overview of the charging station (39)
r To set up the charging station
1 Remove the rear panel by gently pushing it
downwards, and then slide it out from the charging
station.
2 Plug the power supply into the socket in the back of
the charging station.
3 Put the rear panel back in place.
6 Non-routine operation
To Next Page
Loading...
