169Maintenance
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
About cleaning and disinfecting the
instrument
Ensure that you are fully familiar with the requirements
for cleaning and disinfecting the instrument.
Healthcare professionals should wear gloves and follow
their facility’s infection control procedures when
handling blood glucose testing equipment.
The gloves worn during cleaning and disinfecting should
be removed and hands washed thoroughly with soap and
water before performing the next test.
Dispose of acceptable cleaning solutions and
disinfectants per facility guidelines.
NOTICE!
Solutions used to clean and disinfect the
instrument
Using cleaning solutions and disinfectants containing
ether, polyhexanide, or prepared solutions or using
wipes containing a mixture of bleach and detergent can
damage system components.
r Only use cleaning solutions and disinfectants
recommended by Roche.
Instrument cleaning status
This notification indicates that either:
• Instrument cleaning is due (date/event).
• Cleaning can be logged.
If a cleaning interval is configured, an icon and an
indication of when the next cleaning is due are displayed.
If only cleaning after a measurement is required, an
instruction is displayed.
When instrument cleaning is overdue, a red warning icon
and the date and time of the instrument cleaning is
displayed.
The instrument cleaning notification is determined by the
following configuration items:
• Cleaning notification after each patient test
• Time interval for cleaning notification (in hours)
u Cleaning notification after each patient test (480)
u Time interval for cleaning notification (in hours) (480)
7 Maintenance
To Next Page
Loading...
Need help?
General
