131Non-routine operation
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
Entering insulin information
You can record information about insulin administered to
a patient.
Your instrument can be configured to enter insulin
information in 2 ways:
• On the Tests screen by tapping the Insulin button.
• After performing a Glucose test.
You enter insulin information on 5 pages, between which
you can move using Next and Previous buttons.
You record the following information:
• Patient details
• Date and time of the insulin administration
• Insulin type
• Insulin name
• Comments about the insulin administration
j
m Your instrument is turned on and you have logged on.
m Your instrument is configured to enter insulin
information
r To enter insulin information
1 Do one of the following:
• On the Tests screen, tap the Insulin button.
• At the end of a glucose test, in the Options dialog
box, tap the Enter insulin dose button, and then
go to step 4.
2 In the Insulin entry screen do one of the following:
• Scan the patient details barcode.
• Tap the tab, enter the patient name or the
patient ID, and then tap the Continue button.
6 Non-routine operation
To Next Page
Loading...
Need help?
General
