190 Resetting a synchronization lockout
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
Resetting a synchronization lockout
You can use the reset synchronization lockout when a
synchronization lockout has occurred on the instrument,
and a synchronization lockout override is unavailable.
This situation might occur due to a network failure, or
other situations.
The reset lasts for the period of time defined by the
Synchronization lockout (in hours) configuration
item, after which the synchronization lockout applies
again.
j
m Administrator rights, if configured
r To reset a synchronization lockout
1 Tap > Administrator > Reset synchronization
lockout.
I
If configured, enter the setup password to access
the Administrator submenu.
f A message is displayed saying Synchronization
lockout was reset.
8 Troubleshooting
To Next Page
Loading...
Need help?
General
