178 Replacing the battery
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
r To replace the battery
1 Place the instrument face down on a level surface,
and using a Torx screwdriver (T5), remove the two
screws holding the battery compartment cover in
place.
2 Remove the battery compartment cover from the
instrument. The battery is now visible and connected
to the instrument by a plug.
3 Using the plastic handle on the battery, carefully lift
the battery out of the compartment.
7 Maintenance
To Next Page
Loading...
Need help?
General
