52 Rockwell Automation Publication IASIMP-QS005H-EN-P - April 2016
Chapter 3 GuardLogix® Controllers Logic Integration
4. Paste the module configuration under the appropriate network in the I/O Configuration of your application file.
This example uses an EtherNet/IP network. Yours could be a DeviceNet or EtherNet/IP network.
5. To edit module properties for your application, right-click the I/O module and choose Properties.
6. Rename the I/O module according to your Fill Out the Safety Module Configuration Worksheet
, which you
created in Chapter
2.
7. Change the IP Address (EtherNet/IP networks) or Node Address (DeviceNet networks).
To Next Page
Loading...