86 Rockwell Automation Publication IASIMP-QS005H-EN-P - April 2016
Chapter 3 GuardLogix® Controllers Logic Integration
3. Double-click the GuardIO_Analog_AOI_Safety tag name field.
4. Type the ModuleName_S of the first Analog Guard I/O module from your Safety Module Configuration
worksheet.
This example shows an Add-On Instruction named E_IE4S_S that is associated with a Analog Guard I/O module
named E_IE4S.
5. Right-click in the tag name field and choose New tag name, where tag name is the name you typed.
To Next Page
Loading...