78 Rockwell Automation Publication 750-TG100B-EN-P - June 2019
Chapter 5 Frame 6 Components
4. Loosen the screw that secures the HIM bezel to the pod chassis, and rotate
the bezel up to a 90° horizontal position.
5. Disconnect the HIM cable from the port on the main control board.
4
M3 x 6.4 mm
T15 or F - 5 mm (0.19 in.)
0.45 N•m (4 lb•in)
Control Pod Shown Removed
from Drive for Clarity Only.
To Next Page
Loading...
