Specifications and Site Requirements
Electrical Specifications
134 MagneMotion
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
NOTICE Hot-plugging of either connector to the motor is not sup-
ported and can damage internal components.
Table 4-3: Stator Drive Connector Pinout
3-Pt Bayonet, Size 16S, 7-Pin, Male
*
* 1/2 m motor uses only Stator 1.
Stator Block 1, Phase A A
Stator Block 1, Phase B B
Stator Block 1, Phase C C
Stator Block 2, Phase A D
Stator Block 2, Phase B E
Stator Block 2, Phase C F
GND G
Table 4-4: Stator Sense Connector Pinout
M12 Eurofast, 6-Pin, Male
+V 1
GND 2
RxD- 3
RxD+ 4
TxD+ 5
TxD- 6
To Next Page
Loading...
