Maintenance
Repair
QuickStick HT User Manual 303
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Install the New Motor
1. See Mounting the Motors on page 181 for detailed installation instructions.
2. Reconnect the power and sense connections to the motor (refer to the labels previously
placed on the cables).
3. Restore power to the section of the QSHT transport system where the motor was
replaced.
4. Program the masters and slaves on the new motor with the current Motor ERF Image
files (see Programming Motors on page 306).
5. Resume motion on the section of the QSHT transport system where the motor was
replaced.
To Next Page
Loading...
Need help?
General
