Introduction
QuickStick HT Transport System Overview
QuickStick HT User Manual 33
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
• Ethernet – 4-wire data transmission protocol for network connections
that uses differential signals to provide noise resistance.
• Stator Sense Connector – Provides the connection for the motor control sig-
nals.
• Stator Drive Connector – Provides the connection for the motor phase power.
• Motor Mount – Used to mount the motor to the guideway.
• Vehicle with Magnet Array – Carries the payload through the QSHT transport sys-
tem as directed. The magnet array is mounted to the vehicle and interacts with the
motors, which moves the vehicle.
To Next Page
Loading...
