Spectrum Analysis
R&S
®
Scope Rider RTH
113User Manual 1326.1578.02 ─ 12
The results of a spectrum measurement can be exported similarly to a waveform (see
also Chapter 12, "Documenting Results", on page 265). The OneTouch functionality is
also available (see Chapter 12.6, "Quick Save with OneTouch", on page 277).
For details on the export file format, see .
File Format
Selects the format of the export file.
"Compressed
CSV"
Comma-separated values (CSV) text file, the waveform is stored in a
table. The columns are separated by commas or another delimiter.
For each sample, one line is written. Values are listed in scientific
notation. You can convert the comma-separated text to columns.
"Compressed
CSV"
ZIP file that contains one or more CSV files. This format reduces the
file size.
Remote command:
SPECtrum:EXPort:NAME on page 366
Save Spectrum, Save Spectrum As
Save the spectrum results.
"Save"
Saves the file in the defined "Directory" using the autonaming pattern.
"Save As"
Opens a file explorer where you can select the directory and enter the
filename.
Remote command:
SPECtrum:EXPort:SAVE on page 366
Directory
Defines the directory where the spectrum files are stored. If a USB flash drive is con-
nected, the instrument stores the data to this external device by default.
Remote command:
SPECtrum:EXPort:NAME on page 366
Filename Base
Defines the first part of the filename. The complete filename pattern is:
<filename base>_<date>_<timestamp>.csv.
Remote command:
SPECtrum:EXPort:NAME on page 366
Store with Freq.
Includes the frequency values in the stored results.
Remote command:
SPECtrum:EXPort:INCXvalues on page 366
CSV Column Delimiter
Selects the column delimiter for CSV files. You need to know the delimiter when you
convert the CSV text to columns in a spreadsheet.
FFT Mode
To Next Page
Loading...
