Rohde & Schwarz Scope Rider RTH1004 - 9.7.2 Sent Configuration Settings

Protocol Analysis
R&S
®
Scope Rider RTH
231User Manual 1326.1578.02 ─ 12
Table 9-11: Enhanced serial message formats
16 bit data and 4 bit message ID 12 bit data and 8 bit message ID
9.7.2 SENT Configuration Settings
Access: "Bus" menu > "Bus Protocol" = "SENT" > "Config"
Source.........................................................................................................................231
Polarity........................................................................................................................ 232
Threshold, Technology, Find Level............................................................................. 232
Clock Period................................................................................................................232
Clock Tolerance...........................................................................................................232
Ser. Message Format..................................................................................................232
Data Nibbles................................................................................................................232
Pause Pulse................................................................................................................ 233
CRC Calculation..........................................................................................................233
CRC Version............................................................................................................... 233
Frame Length..............................................................................................................233
Source
Sets the source of the line. All active analog channels can be used.
If option R&S RTH-B1 is installed, digital channels can also be used as source.
SENT (Option R&S
RTH-K10)