Rohde & Schwarz Scope Rider RTH1004 - Mask Testing

Remote Control Commands
R&S
®
Scope Rider RTH
348User Manual 1326.1578.02 ─ 12
Return values:
<TimeStampRel> String containing the relative time in seconds.
Usage: Query only
15.5 Mask Testing
15.5.1 Mask Definition
The suffix <m> selects the mask channel for which the command is executed. The
number of channels depends on the instrument type. The R&S RTH1004 has 5 mask
channels, the suffix values are 1 | 2 | 3 | 4 | 5. The R&S RTH1002 has 3 mask chan-
nels, the suffix values are 1 | 2 | 5. Suffix 5 is used for the mask on a math waveform.
MASK:CHANnel<m>:STATe............................................................................................ 348
MASK:CHANnel<m>:PROPerties:XWIDth........................................................................ 348
MASK:CHANnel<m>:PROPerties:YWIDth........................................................................ 348
MASK:CHANnel<m>:CREatemask.................................................................................. 349
MASK:CHANnel<m>:STATe <State>
Turns the selected mask on or off.
Suffix:
<m>
.
1|2|5 (RTH1002) , 1..5 (RTH1004)
Parameters:
<State> ON | OFF
*RST: OFF
MASK:CHANnel<m>:PROPerties:XWIDth <WidthX>
Changes the width of the selected mask in horizontal direction.
Suffix:
<m>
.
1|2|5 (RTH1002) , 1..5 (RTH1004)
Parameters:
<WidthX> Range: 0 to 10
Increment: 0.01
*RST: 0.05
Default unit: div
MASK:CHANnel<m>:PROPerties:YWIDth <WidthY>
Changes the width of the selected mask in vertical direction.
Mask Testing