Documenting Results
R&S
®
Scope Rider RTH
278User Manual 1326.1578.02 ─ 12
OneTouch Directory
Defines the directory where the OneTouch ZIP files are stored. If a USB flash drive is
connected, the instrument stores the data to this external device by default.
Screenshot, Waveform, Setting
Select the data that you want to include in the OneTouch file.
Comment
If enabled, you can enter a comment when you save a OneTouch file. The comment is
written to a text file, which is included in the ZIP file. Furthermore, the first 10 charac-
ters of the comment are added to the ZIP filename.
Filename Base
Defines the first part of the filename. The complete filename pattern is:
<filename base>_<date>_<time>_<comment10ch>.zip.
12.7 Screenshots
You can create and save sceenshots of the current display of your waveforms and
measurement results. If a USB flash device is connected to the R&S RTH, the instru-
ment saves the screeenshot to the USB flash drive. Otherwise, the screenshots are
saved on the microSD card.
To save the current display in a screenshot:
1. Press the FILE key.
2. Disable "One touch".
3.
Press the key each time when you want to save a screenshot.
To configure the sceenshots:
►
Press and hold the key until the menu opens, or open the "Screenshot" menu
using the "Menu" button.
You can also view all saved screenshots directly on the instrument.
12.7.1 Screenshot Settings
Access: "Screenshot" menu
Screenshots
To Next Page
Loading...
