Rohde & Schwarz Scope Rider RTH1004 - 10 Logic Analyzer (R&S RTH-B1 MSO); Logic Analyzer Settings

Logic Analyzer (R&S RTH-B1 MSO)
R&S
®
Scope Rider RTH
251User Manual 1326.1578.02 ─ 12
10 Logic Analyzer (R&S RTH-B1 MSO)
The Mixed Signal Option R&S RTH-B1 adds logic analyzer functions to the classical
oscilloscope functions. Using the logic analyzer, you can analyze and debug embed-
ded systems with mixed-signal designs that use analog signals and time-correlated
digital signals simultaneously. The option provides a logic probe with 8 logic channels.
The instrument ensures that analog and digital waveforms are time-aligned and
synchronized so that critical timing interactions between analog and digital signals can
be displayed and tested.
Each logic channel can be displayed on the screen and used as trigger source.
► To activate the logic analyzer, shortly press the [LOGIC] key.
To disable, press [LOGIC] again.
► To configure logic channels, press and hold the [LOGIC] key until the "Logic" menu
opens.
To scale and move the logic channels vertically:
1. If the logic channels are not focused, press the [LOGIC] key to set the focus.
2. Press the vertical [RANGE] and [POS] keys.
10.1 Logic Analyzer Settings
Access: "Logic" menu
Logic Analyzer Settings