Rohde & Schwarz Scope Rider RTH1004 - Logger Settings

Data Logging
R&S
®
Scope Rider RTH
159User Manual 1326.1578.02 ─ 12
8.3.3 Loading Logged Data
Logged data can be loaded from the slot, in which they were stored.
1. Access the logger mode, see Chapter 8.1, "Accessing the Logger Mode",
on page 155.
2. Select the "Logger" menu.
3. If a data logging is running, press [RUN STOP] to stop logging.
4. Select the slot with the logs that you want to display.
5. Tap "Load Slot" to display the stored logs.
8.3.4 Deleting Logged Data
Logs stored on the slots can be deleted individually or all together.
To delete logs of a single slot:
1. Select the slot with the logs which you want to delete.
2. Tap "Clear Slot".
To delete logs on all slots:
► Tap "Clear All Slots".
8.4 Logger Settings
Access: "Logger" menu
Logger Settings