Rohde & Schwarz Scope Rider RTH1004 - WLAN Connection (Option R&S RTH-K200;200 US)

Remote Control Commands
R&S
®
Scope Rider RTH
503User Manual 1326.1578.02 ─ 12
DISPlay:PERSistence:TIME <PersistenceTime>
Sets a user-defined persistence time. The command takes effect if DISPlay:
PERSistence[:TYPE] is set to TIMe.
Parameters:
<PersistenceTime> Range: 0.05 to 10
Increment: 0.01
*RST: 0.05
Default unit: s
DISPlay:CONTrast <ContrastMode>
If enabled, the waveforms are displayed in black color on white background.
Parameters:
<ContrastMode> ON | OFF
*RST: OFF
DISPlay:MOUS <EnableTouch>
Switches the touch functionality of the screen on or off.
If you use the instrument in an environment with immissions considerably higher than
specified, the immisions may affect the touch sensitivity of the screen. In this case, dis-
able the touch and operate the instrument using the keys and the wheel.
Parameters:
<EnableTouch> ON | OFF
*RST: OFF
DISPlay:LCD <EnableLCD>
Turns the LCD display on or off.
Parameters:
<EnableLCD> ON | OFF
*RST: OFF
15.15 WLAN Connection (Option R&S RTH-K200/200US)
SYSTem:COMMunicate:WLAN:MODE <Mode>
Selects the wireless LAN function of the instrument. It can serve as access point or as
client.
WLAN Connection (Option R&S RTH-K200/200US)