General Instrument Setup
R&S
®
Scope Rider RTH
290User Manual 1326.1578.02 ─ 12
1. If you received the option key in a file, save the file to a USB flash drive, and con-
nect the drive to the R&S RTH.
2.
Press the key.
3. Select "Options", and select the "Active options" tab.
4. If you received a key in written form, enter the key in the "Enter new option key"
field.
If you received a key in digital form as a file, tap "Install from file", select path /
media/USB1, and select the option key file.
5. If you want to activate several options, repeat step 3 for each option.
6. Restart the instrument.
13.8 Updating the Firmware
Your instrument is delivered with the latest firmware version. Firmware updates are
provided on the Internet at www.rohde-schwarz.com/product/rth.html > "Downloads" >
"Firmware". Along with the firmware file, you find the Release Notes describing the
improvements and modifications.
Make sure to update the firmware if a new version is available.
1. Download the firmware installation file RTH*.rsi, and save it to a USB flash drive.
2. Connect the USB flash drive to the USB connector on the right panel of the instru-
ment.
3.
Press
.
4. Scroll down the menu and tap "Open File" under "Firmware Update".
Updating the Firmware
To Next Page
Loading...
