Rohde & Schwarz Scope Rider RTH1004 - Counter Mode (R&S RTH-K33)

Remote Control Commands
R&S
®
Scope Rider RTH
406User Manual 1326.1578.02 ─ 12
Usage: Query only
METer<m>:CALCulate:AVERage:MAXimum?
Returns the maximum value of the measurement series.
Suffix:
<m>
.
1..4
R&S RTH1002: always 1, omit the suffix
R&S RTH1004: Selects the voltmeter.
Return values:
<Maximum> Range: -100E+24 to 100E+24
Increment: 1E-12
*RST: 0
Default unit: V
Usage: Query only
METer<m>:CALCulate:AVERage:CLEar
Deletes all statistical values.
Statistics are also deleted if:
●
The measurement function changes (METer:SENSe:FUNCtion).
●
*RST
●
SYSTem:PRESet
Suffix:
<m>
.
1..4
R&S RTH1002: always 1, omit the suffix
R&S RTH1004: Selects the voltmeter.
Usage: Event
15.9 Counter Mode (R&S RTH-K33)
COUNter<m>:ABORt..................................................................................................... 407
COUNter<m>:CALCulate:AVERage:ALL?.........................................................................407
COUNter<m>:CALCulate:AVERage:AVERage?................................................................ 407
COUNter<m>:CALCulate:AVERage:CLEar....................................................................... 407
COUNter<m>:CALCulate:AVERage:COUNt:CURRent?..................................................... 408
COUNter<m>:CALCulate:AVERage:MAXimum?............................................................... 408
COUNter<m>:CALCulate:AVERage:MINimum?................................................................ 408
COUNter<m>:CONFigure:FREQuency.............................................................................409
COUNter<m>:CONFigure:VALue?................................................................................... 409
COUNter<m>:FETCh?................................................................................................... 409
COUNter<m>:INITiate.................................................................................................... 410
COUNter<m>:MEASure:FREQuency?............................................................................. 410
Counter Mode (R&S
RTH-K33)