Getting Started
R&S
®
Scope Rider RTH
23User Manual 1326.1578.02 ─ 12
1 = Measurement results, depends on the mode and the selected measurement
2 = Time scale (horizontal scale, in s/division)
3 = Trigger type, trigger source, and trigger mode
4 = Capture status
5 = Battery status and AC connectivity for battery charging; date and time
6 = Trigger level marker, has the color of the trigger source
7 = Trigger position marker, has the color of the trigger source
8 = Channel markers indicate the ground levels. Channel C3 has the focus
9 = Vertical settings for each active channel: vertical scale (vertical sensitivity, in V/division), bandwidth limit
(no indicator = full bandwidth, BW= limited frequency), coupling (AC or DC)
10 = Logic channels (MSO R&S RTH-B1)
11 = Menu button
You can adjust the vertical position of each waveform, the trigger level, and the trigger
position by dragging the corresponding marker on the display. Alternatively, tap a
marker to set the focus, and use the wheel to adjust position.
2.4 Operating Basics
2.4.1 Accessing the Functionality
The complete functionality is available in the menus and dialogs on the touchscreen.
You can touch the functions directly on the display, or you can use the wheel to navi-
Operating Basics
To Next Page
Loading...
