Rohde & Schwarz Scope Rider RTH1004 - Page 16

Getting Started
R&S
®
Scope Rider RTH
16User Manual 1326.1578.02 ─ 12
► Pull the tilt stand as shown below.
2.2.5 EMI Suppression
Electromagnetic Interference (EMI) may affect the measurement results.
To suppress generated Electromagnetic Interference:
●
Use suitable shielded cables of high quality. For example use double-shielded RF
and LAN cables.
●
Always terminate open cable ends.
●
Note the EMC classification in the data sheet.
Preparing for Use