EasyManua.ls Logo

Rohde & Schwarz Scope Rider RTH1004 - Page 170

Rohde & Schwarz Scope Rider RTH1004
530 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Data Logging
R&S
®
Scope Rider RTH
170User Manual 1326.1578.02 ─ 12
MATLAB CSV Description
samples_per_value SamplesPerValue Compression factor. If data logging is run-
ning for more than 2 days and 7 hours,
the logger compresses subsequent log-
ging values into a "Minimum", "Average"
and "Maximum" value. SamplesPerValue
= 4 means that four values are summar-
ized.
measurement(m) ArrayItem:Index Logger channel (1, 2, 3, or 4)
In CSV: Logger channel = Index + 1
Enabled Status of the logger channel: on or off
measurement(m).type MeasTypeAsStr Type of the logged measurement
measurement(m).unit MeasUnitAsStr Unit of the logged measurement
measurement(m).total_min_value Minimum Lowest value of the logged data
measurement(m).total_min_value_time TimeOfMin Time when the minimum was measured
measurement(m).total_max_value Maximum Highest value of the logged data
measurement(m).total_max_value_time TimeOfMax Time when the maximum was measured
measurement(m).total_avg_value Average Average value of the logged data
measurement(m).standard_deviation StdDeviation Standard deviation of the logged data
Export of Logger Records

Table of Contents

Other manuals for Rohde & Schwarz Scope Rider RTH1004

Related product manuals