Frequency Counter (R&S RTH-K33)
R&S
®
Scope Rider RTH
258User Manual 1326.1578.02 ─ 12
2
3
1
Figure 11-2: Display for reference counter
1 = Measured frequency at basic counter
2 = Measured frequency at reference counter (used as a reference frequency for basic counter)
3 = Counter usage
If both counters are active, you can display both measured counter frequencies at the
same time. When both counter results are displayed simultaneously, only the mea-
sured frequencies and the load bargraphs are displayed. Statistics or additional set-
tings are not available.
Display and Control
To Next Page
Loading...
