Rohde & Schwarz Scope Rider RTH1004 - Page 269

Documenting Results
R&S
®
Scope Rider RTH
269User Manual 1326.1578.02 ─ 12
12.3.2 Saving and Loading Savesets
You can save and reload an unlimited number of configuration setups. By default, the
settings are stored on the microSD card in the following directory:
media/SD/Rohde-Schwarz/RTH/SaveSets
The storage location can be changed. The file format is XML.
To save the current settings in a saveset
1. Press the [FILE] key.
2. Tap "Settings".
3. The current storage location is shown in "Setting Directory".
● To store the file under a default name in the specified directory, tap "Save Set-
ting".
● To store the file in another directory and/or with a user-defined filename, tap
"Save Setting As". Select the path, directory, and enter the filename.
To load and display a saveset
1. Press the [FILE] key.
2. Tap "Settings".
3. The current storage location is shown in "Setting Directory".
● To load a file from the specified directory, tap "Load Setting".
● To load a file from another directory, tap "Setting Directory" and change the
directory.
Tap "Load Setting".
4. Select the file to be loaded.
Description of settings
Instrument Settings