Network Connections
R&S
®
Scope Rider RTH
293User Manual 1326.1578.02 ─ 12
Description of settings
Interface
Select LAN or USB connection.
Status
Shows the connection status.
Hostname
Shows the computer name of the instrument.
In a LAN that uses a Domain Name System server (DNS server), each computer or
instrument can be accessed using a unique name instead of the IP address. The DNS
server translates the host name to the IP address. The host name is useful when a
DHCP server is used, as a new IP address is assigned each time the instrument is
restarted.
The default name is RTH-<serial_number>. You can change the name, but make sure
that the name is unique in the LAN.
DHCP
Enables dynamic TCP/IP configuration using the Dynamic Host Configuration Protocol
(DHCP). If DHCP is on, all address information is assigned automatically. Disable
DHCP if the network does not support this protocol.
IP Address, Subnet mask, Gateway, DNS Server
Shows the IP address and other address information for LAN connection.
LAN Connection
To Next Page
Loading...
