R&S SMC100A User Documentation
1411.4060.32 0.1 E-1
Contents of User Documentation for the Signal Generator
R&S SMC100A
The user documentation describes the Signal Generator R&S SMC and all options. It includes a printed
Quick Start Guide and a CD-ROM with the complete operating and service manual in printable pdf-
format and the data sheet.
The R&S SMC is equipped with a context-sensitive online help that offers a help page for each instru-
ment function.
Quick Start Guide
The present quick start guide describes everything that is needed
to put the instrument into operation and to get familiar with the
generator. The quick start guide gives an introduction to remote
control and manual control via external monitor, mouse and key-
board.
The quick start guide is subdivided into 4 chapters plus index:
Chapter 1 describes the control elements and connectors
on the front and rear panel as well as all proce-
dures required for putting the instrument into
operation.
Chapter 2 gives an introduction the operating concept and
typical applications of the R&S SMC.
Chapter 3 describes key operating modes, the structure of
the graphical interface and the principles of
manual control.
Annex contains an index for the quick start guide.
Help System
The help system is embedded in the instrument, offering quick,
context-sensitive reference to the information needed for opera-
tion and programming. The help contains the complete user
documentation for the Signal Generator including the contents of
the present quick start guide.
The help files (*.chm) are also available on the CD-ROM and can
be used as a standalone help.
To Next Page
Loading...
