Rohde & Schwarz SMC100A - Restoring the Previous Value - Setting Parameters

R&S SMC100A Setting Parameters
1411.4077.62 3.17 E-1
Function Front panel PC keyboard Mouse
Confirms entries in the
menus with the Accept
button.
Press Accept button.
Select Accept button with
the arrow keys and press
Enter.
Click Accept button.
Sets the entries in the
instrument
If the instrument function is
active, the new value is
immediately calculated and set.
If the instrument function is not
active, the new, confirmed value
is calculated and set only when
the function is switched on.
(see front panel) (see front panel)
Restoring the Previous Value - Setting Parameters
Parameter variations with the rotary knob are immediately set and therefore not reversible.
Normally, values cannot be restored also in the case of mouse control because no explicit confirmation
is required in this case and entries are automatically confirmed when the entry or selection field is
exited.
In the case of front-panel control or operation from the keyboard, previous values can be restored as
long as the new value is not confirmed, i.e. the entry is not completed. This can be done with the
ESC
key.
Function Front panel PC keyboard Mouse
Restores previous values
Press the ESC key before
the entries are confirmed.
Press the Esc key before the
entries are confirmed.
-