Hardware Interfaces R&S SMC100A
1411.4060.32 8.8 E-1
USB Connection (USB and USB IN)
The instrument is equipped as standard with three USB (universal serial bus) interfaces which are
located at the rear of the instrument.
USB
One of them is a type A interfaces (host USB) which establishes a connection to the controller. It can be
used for connecting peripherals such as mouse and keyboard or a memory stick for data transmission.
USB IN
The second USB interface is a type B interface (device USB) hence the instrument is assigned as
device, not as host. It can be used for remote control (see chapter "Remote Control - Basics").
To Next Page
Loading...
