Legend for Rear Panel View R&S SMC100A
1411.4077.62 1.8 E-1
Legend for Rear Panel View
This section gives an overview of connectors on the rear panel of the R&S SMC. Each connector is
briefly described and a reference is given to the chapters containing detailed information. For technical
data of the connectors refer to the data sheet.
Fig. 1-2 Rear panel view
1 AC supply
AC supply connector.
When the R&S SMC is connected to
the AC supply, it automatically sets
itself to the correct range for the
applied voltage (range: see type
label). There is no need to set the
voltage manually or change fuses.
Power switch.
The main power switch switches the
power of the instrument on.
See chapter 1, section
"Connecting the
R&S SMC to the AC
Supply" and data
sheet
To Next Page
Loading...
