R&S SMC100A Legend for Rear Panel View
1411.4077.62 1.9 E-1
2 Fuses
Fuses:
The R&S SMC is fully fused by two
fuses IEC127-T3.15H/250 V.
See chapter 1, section
"Power Fuses" and
data sheet
3 IEEE 488 - IEC/IEEE-bus connector
IEC 625/IEEE 488
IEC-bus (IEEE 488) interface for
remote control of the R&S SMC.
See data sheet and
chapter 8, section
"IEC/IEEE Bus
Interface"
4 Output of pulse and video signal
PULSE VIDEO
Output of internal pulse generator
signal or external pulse signal fed in
via the PULSE EXT connector (video
signal).
See chapter 4, section
"Pulse Modulation"
5 Input of external pulse signal / Instrument triggering
PULSE EXT
Input of external pulse signal or input
of external trigger/gate signal for
internal pulse generator.
INST TRIG
Input for external trigger for sweeps.
See chapter 4, section
"Pulse Modulation", data
sheet and chapter 4,
section "Sweep Mode"
6 Reference signal output
REF OUT
Output of internal 10-MHz-reference
signal.
See data sheet and
chapter 4, section "RF
Reference Frequency -
Reference Oscillator"
7 Reference signal input
REF IN
Input for external 10-MHz-reference
signal.
See data sheet and
chapter 4, section "RF
Reference Frequency -
Reference Oscillator"
To Next Page
Loading...
