Rohde & Schwarz SMC100A - Accessing Dialogs

R&S SMC100A Setting Parameters
1411.4077.62 3.14 E-1
Entering a Value - Setting Parameters
Numeric and alphanumeric values can be edited in the entry fields. In the overwrite editing mode is
used.
Numeric values can either be newly entered or the existing value can be varied. Incorrect entries are
cleared with the
BACK SPACE key.
• Entering a new value:
A click on a numeric key activates the editing mode. The previous value is cleared and the new
value can be entered.
• Variation:
Clicking the rotary knob (= Enter) activates the editing mode. Set the cursor to the left of the number
to be changed using the left/right arrow keys. The value at the cursor position is varied. An increase
or decrease of the value depends on the cursor used (up/down) or on the direction of rotation of the
rotary knob.
Alphanumeric values can be newly entered (e.g. file name).
• New entry:
The entry is started by clicking an alphanumeric key.
Function Front panel PC keyboard Mouse
Enters a new value
Press an alphanumeric key.
Press a letter key or a
numeric key.
-
Edits a value
Click the rotary knob. Select the
desired numeric digit with the
rotary knob and mark it by
clicking the button. Change the
number using the keypad.
Press the Enter key. Select
the desired numeric digit
using the left/right arrow
keys. Enter new value using
the keyboard.
Click the desired position to
set the cursor. Change the
value using the keyboard.
Varies a value
Click the rotary knob. Select the
desired numeric digit with the
rotary knob and mark it by
clicking the button. Vary the
number using the rotary knob.
Press the Enter key. Select
the desired numeric digit
using the left/right arrow
keys. Vary the number using
the up/down arrow keys.
-