Rohde & Schwarz SMC100A - Expression Data Not Allowed (-178); GET Not Allowed (-105); Hardware Error (-240); Hardware Missing (-241)

Alphabetical List of SCPI-Error Messages R&S SMC100A
1411.4060.32 9.6 E-1
Expression data not allowed (-178)
The command contains a mathematical expression at an impermissible position.
SCPI:
Command error - sets bit 5 in the ESR register
GET not allowed (-105)
A Group Execute Trigger (GET) is within a command line.
Note:
A Group Execute Trigger (GET) is only allowed at the end of a
command line or in a separate command line.
SCPI:
Command error - sets bit 5 in the ESR register
Hardware error (-240)
A legal program command or a query could not be executed because of a hardware
problem in the device.
SCPI:
Execution error - sets bit 4 in the ESR register
Hardware missing (-241)
A legal program command or a query could not be executed because of a missing
device hardware.
Example:
An option is not fitted.
SCPI:
Execution error - sets bit 4 in the ESR register
Header suffix out of range (-114)
The command contains an illegal numeric suffix.
Example:
:SOURce22 is not defined for the signal generator.
SCPI:
Command error - sets bit 5 in the ESR register