R&S SMC100A Storing and Loading Instrument Data
1411.4060.32 4.37 E-4
Recall - File
Loads the selected configuration.
If an instrument setting in which a sweep was activated is stored, the
sweep is started when the recall command is called.
If an instrument setting which accesses lists is stored, this list is also
loaded. If the list has been modified, the new entries will be used. An
error message appears if an attempt is made to access a non-existing
list or to activate settings which are not supported by the instrument.
Remote-control command:
MEMM:LOAD:STAT 2,"/var/user/testfile.savrcl"
*RCL 2
Recall Immediate x
Loads the selected configuration from one of the three intermediate
memories.
If an instrument setting in which a sweep was activated is stored, the
sweep is started when the recall command is called.
If an instrument setting which accesses lists is stored, this list is also
loaded.
If the list has been deleted in the meantime, an error message
appears when the instrument setting is loaded. If the list has been
overwritten in the meantime, the new entries will be used.
A message appears if no instrument configuration is stored in this
memory.
Remote-control command:
*RCL 1
File Management - File
The File Management menu provides all the functions required for file management. Directories can be
created, and files copied, deleted and moved between the directories on the devices (internal flash
memory and memory stick).
File Type
Selects the file types to be indicated. If a file type with a specific file
extension (*.lsw) is selected only files with this extension are indicated
in the selected directory.
Remote-control command: n.a.
To Next Page
Loading...
