Rohde & Schwarz SMC100A - Loading Instrument Settings - Setup Settings

R&S SMC100A General Instrument Settings
1411.4060.32 4.27 E-4
Loading Instrument Settings - Setup Settings
If Recall is selected under Select Operation, the File menu provides options for loading complete
instrument settings. Here it is possible to select whether the current or stored RF frequency and RF
l
evel settings are to be used.
Recent data sets - File
Displays the files last used. The entire path is shown.
If the desired file is in the list, it can be selected in this window.
Remote-control command: n.a.
Directory - File
Enter the directory in which the file with the instrument setting to be
loaded is located.
The Selected file window lists all the files in this directory.
Remote-control command:
MMEM:CDIR "/var/user"
File List - File
Selects the file with the desired instrument configuration.
Remote-control command:
MMEM:CAT?
Exclude Frequency -
File
The current frequency is retained when a stored instrument setting is
loaded.
Remote-control command:
SOUR:FREQ:RCL EXCL
Exclude Level - File
The current level is retained when a stored instrument setting is
loaded.
Remote-control command:
SOUR:POW:RCL EXCL