General Instrument Settings R&S SMC100A
1411.4060.32 4.26 E-1
Directory - File
Selects the directory in which the file is to be stored. The window
opposite lists all settings files in this directory.
A new directory can be created in the File Manager (File Manager…
button).
Remote-control command:
MMEM:CDIR "/var/user"
(The path can also be entered when the file is stored.)
File List - File
Displays the files which are in the selected directory.
If a file is highlighted, it is overwritten when the file is stored.
Remote-control command:
MMEM:CAT?
File Name - File
Enter the file name of the file without file extension. This file is then
created.
Remote-control command: n.a.
(The file name is entered when the file is stored.)
Save - File
Stores the current instrument settings under the specified path.
Remote-control command:
*SAV 1
MEMM:STOR:STAT 1,"/var/user/testfile.savrcl"
Save Immediate x
Stores the current instrument setting in one of the three intermediate
memories.
These instrument settings are retained until a different instrument
setting is stored in the intermediate memory. When the instrument is
switched off, the contents of the intermediate memories are retained.
Remote-control command:
*SAV 1
File Management
Calls the File Management menu.
Directories can be created and files managed in this menu (see the
section "File Management - File", page 4.29).
Remote-control command: n.a.
To Next Page
Loading...
