R&S SMC100A General Instrument Settings
1411.4060.32 4.21 E-4
Visa Resource String
Indicates the visa resource string. This string is used for remote
control of the instrument. A separate string is provided for remote
control via the LAN and the USB interface
Remote-control commands:
SYST:COMM:NETW:RES?
R
esponse: TCPIP::192.1.2.3::INSTR
SYST:COMM:USB:RES?
Response: USB::54::000000::INSTR
Local - Remote
Channel Settings
Switches the instrument to operate in local control mode.
Switching from remote to local control mode can be also done with
one of the following actions:
manually with the
LOCAL key on the front panel
with the interface command >L via the remote-control interface
with the key combination CTRL + Q
Remote-control command: n.a.
Protection - Setup-Protection
The Protection menu provides access to the unlocking of protected service functions (authorized
personnel of R&S Service Departments only). To deactivate the protection, the correct password has to
be entered. After the instrument has been switched on, the protection levels 1 to 5 are automatically
activated.
Protection Level 1 can be deactivated to expand the functionality of the internal adjustment, to change
the host name and to access the self tests (see service manual). The password is 123456.
Remote-control command:
SYST:PROT1:STAT ON
SYST:PROT1:STAT OFF, 123456
To Next Page
Loading...
