Rohde & Schwarz SMC100A - Putting into Operation

Legend for Rear Panel View R&S SMC100A
1411.4077.62 1.10 E-1
8 LAN interface
LAN
Ethernet interface
– Remote control of signal
generator
– Remote access to graphical user
interface of signal generator.
See data sheet and
chapter 1, section
"Connecting the
R&S SMC to a Network
(LAN)", chapter 8,
section "LAN
Connector" and chapter
5, section "Remote
Control via LAN
Interface""
9 Oven-controlled reference oscillator (option R&S SMC-B1)
OCXO
This option (option R&S SMC-B1)
generates a very precise 10 MHz
reference signal. It needs some
minutes of warm-up time to reach its
nominal frequency.
See data sheet
10 USB connectors type A
USB
USB (universal serial bus) interfaces
of type A (host).
– Connection of peripherals such
as mouse and keyboard
– Connection of memory stick for
firmware update
See chapter 1, section
"Connecting an
External Keyboard and
Mouse" and chapter 8,
section "USB
Connection (USB and
USB IN)"
11 USB interface type B
USB IN
USB (universal serial bus) interface of
type B (device) for remote control of
signal generator.
See chapter 8, section
"USB Connection
(USB and USB IN)"