R&S SMC100A User Documentation
1411.4060.32 0.3 E-1
Chapter 4 forms a reference for manual control of the
R&S SMC and contains a detailed descrip-
tion of all instrument functions and their ap-
plication. The chapter also lists the remote
control command corresponding to each in-
strument function.
Remote Control
Chapter 5 describes the basics for programming the
R&S SMC, command processing and the
status reporting system.
Chapter 6 lists all the remote-control commands de-
fined for the instrument.
Chapter 7 -
Chapter 8 describes preventive maintenance and the
characteristics of the instrument’s inter-
faces.
Chapter 9 gives the status messages and a list of er-
ror messages that the R&S SMC may gen-
erate.
Annex lists the remote-control commands in al-
phabetical order, and
contains an index of the operating manual.
Service Manual Instrument
The service manual - instrument informs on how to check
compliance with rated specifications, on instrument function,
repair, troubleshooting and fault elimination. It contains all in-
formation required for the maintenance of R&S SMC by ex-
changing modules. In addition it describes how to perform a
firmware update and how to install options.
Internet Site
The Internet site at: Signal Generator R&S SMC100A
provides the
most up to date information on the R&S SMC. Additionally firm-
ware updates including the associated release notes, instrument
drivers, current data sheets and application notes are provided for
download on the internet site.
The current operating manual at a time is available as printable
PDF file in the download area.
To Next Page
Loading...
