Legend for Front Panel View R&S SMC100A
1411.4077.62 1.2 E-1
1 Keys for general instrument settings
PRESET
Sets the instrument to a defined state.
HELP
Displays context-sensitive help text.
LOCAL
Switches from REMOTE control to LOCAL
(manual) control.
SETUP
Opens the setup menu for configuring
general instrument settings.
See chapter 4, section
"General Instrument
Settings"
2 Display
Display The display clearly shows all main settings and
signal generator states.
The display is divided into two sections:
- Frequency and level display with info line
(status bar)
- Block diagram
See chapter 3, section
"Display"
Display
The block diagram shows the current configuration
and the signal flow in the generator with the aid of
function blocks containing an ON/OFFswitch.
Clicking the function block opens a list of
associated setting menus. Active menus and info
windows are displayed on top of the block diagram.
The block diagram is displayed in the foreground by
pressing the diagram button
Diagram or by clicking
on the DIAGR key in the key emulation dialog.
To Next Page
Loading...
