Rohde & Schwarz SMC100A - Page 19

R&S SMC100A Legend for Front Panel View
1411.4077.62 1.5 E-1
4 Keypad for data entry
ENTER
– Calls the next menu level.
– Activates the editing mode for
highlighted numeric and
alphanumeric parameters.
– Terminates a data entry; the new
value is set.In case of numeric
parameters, the unit indicated next
to the value in the menu applies.
– Switches highlighted status
parameters on and OFF
(ON/OFFstate).
– Confirms (OK) and closes
message windows.
See chapter 3, section
"Setting Parameters"
5 Keys for settings and navigation in the display and for setting parameters
Keys for settings and navigation in the display and
for setting parameters
Rotary knob
– Varies the value at a cursor position.
For frequency and level entry, a fixed step
width can be set and activated for the
variation.
– Moves the entry cursor in the block diagram
or menu.
– Moves the cursor in tables and selection lists.
– Clicking the rotary knob (= Enter) terminates
entries. In this case the entry mode is
terminated and the value set.
See chapter 3, section
"Setting Parameters
Keys for setting and navigation in the display and
for setting parameters
Arrow keys
Vary the entry value or highlight a selected
list item in the editing mode.
Highlight parameters in menus and tables
(up/down).
Move the cursor in the entry fields (editing
mode). Highlight parameters in menus and
tables (left/right).
See chapter 3, section
"Setting Parameters