R&S SMC100A Display
1411.4077.62 3.7 E-1
A history of all messages that have occurred since instrument switch-on can be called with the History
button. The most recent message is displayed first.
Info line
List of current messages with short message text.
Detailed description for highlighted message
Buttons
The messages are color-coded according to their level. Device-specific messages are red, info and
remote control error are black. The level is also indicated in the Lev column (Err, Sys or Info). Column
SCPI indicates the SCPI error code.
With the aid of the softkey buttons, error messages can be cleared and a history of all messages called.
Delete
Clears the highlighted message. This button is available only if the history of the
message is displayed.
Remote-control command: n.a.
Delete All
Clears all messages. This button is available only if the history of the message is
displayed.
Remote-control command:
SYST:ERR:ALL?
(Each time a SYSTem:ERRor:ALL? query is sent, the error queue is returned and
at the same time cleared).
History
Calls the list of all messages that have occurred since instrument switch-on. The
most recent messages are displayed at the top of the list. When the button is
pressed again, the list of current messages is displayed.
Remote-control command:
SYST:ERR? or STAT:QUE?
(Each time a SYSTem:ERRor? or
:STATus:QUEue?
query is sent, the oldest entry
in the error queue is returned and at the same time cleared in the list).
To Next Page
Loading...
