R&S SMC100A General Instrument Settings
1411.4060.32 4.7 E-4
The list below the table shows the settings that are not affected by the
PRESET key.
Table 4-1 Preset state - important generator settings
Setting Preset value
RF frequency 1 GHz
RF level RF output switched o
Offsets 0
Modulations Switched o
Uninterrupted level setting Switch o; level attenuator mode: AUTO
Internal level control Level ALC: AUTO
User correction Level Ucor: O
LF output Switched o
Sweep Switched o
Settings that are not affected by the PRESET key
• Reference frequency settings (Ref Oscillator menu)
• Power on settings (Level/EMF menu)
• Network settings (Setup menu)
• IEC/IEEE-bus address (Setup menu)
• *IDN? identification (Setup menu)
• Password and settings protected by passwords (Setup menu)
• Start/Stop Gui Update (Setup menu)
• Display settings (Setup menu).
To Next Page
Loading...
