General Instrument Settings R&S SMC100A
1411.4060.32 4.12 E-1
The Software / Options menu under System is opened using the
SETUP key.
Remote-control commands:
*OPT?
Response:
"SMC-B103, SMC-K4 ...."
*IDN?
Response:
"Rohde&Schwarz,SMC,1411.4002k02/342988,2.02.0.0 (Release)"
The Firmware section of the menu shows the firmware version and the version of the software
platform.
Note:
Your R&S SMC is delivered with the latest firmware version available. Firmware updates as well as
the Release Notes describing the improvements and modifications are provided on the Internet at
the download site of the Rohde & Schwarz SMC home page (http://www.rohde-
schwarz.com/product/smc100a). This home page always offers the latest information on your signal
generator, e.g. also on changes of the firmware update procedure.
The tables in the sections Hardware and Software list the installed hardware and software options.
Option
Short name of option
More…
Opens a dialog with additional information, e.g. on designation, license
number, and expiration date of option
For regular options, Permanent is indicated in this column.
Some options are available as trial versions. This column shows their
expiration date. After this date, the option is no longer available on the
instrument.
Section Loaded Modules is provided for service purposes. It lists all loaded software modules with
their versions and offers a short description of each module.
To Next Page
Loading...
