Roland M-480 - Page 102

102
Effects and GEQ
Effects and GEQ
1.
Access the FX EDIT popup for the desired effect.
fig.ScrFxEdit.eps
2.
Use [F1]–[F6] to switch between tabs to view the
parameters you want to edit.
3. Move the cursor to the desired parameter, and use the
value dial to change the value.
4.
Press [F8 (CLOSE)] to close the popup.
The effect library is used to select the effect type. You can recall
effect settings from the library, and store the current effect
settings in the library.
Effect library operations are performed in the FX LIBRARY popup.
1.
Access the FX EDIT popup for the desired effect.
2.
Press [F7 (LIBRARY)].
fig.ScrFxLibGuide.eps
The FX LIBRARY popup will appear.
Applicable effect indicator
This indicates the FX to which the FX LIBRARY popup applies.
MODE select buttons
These select the effect mode from the following choices:
Library data list
This is the list of library data. If you’ve used the MODE select
buttons to select “GEQ x2”, the GEQ library (p. 109) will be
shown:
Applicable GEQ select buttons
If you’ve used the MODE select buttons to select “GEQ x2”,
these buttons select whether the A side or B side will be the
target of library operations.
The function buttons have the following operations:
For details on library operations, refer to “Library operations” (p.
39).
Editing effect parameters
Using the effect library
2
4
1
3
EFFECT
Use as a conventional effect.
GEQ x2 Use as a dual GEQ.
NO. Indicates library data numbers.
Preset data number is start with ‘P‘.
User data number is start with ‘U‘.
NAME Indicates the name of library data.
TYPE Indicates the effect type.
STATUS “PRESET” is shown for the preset data.
“LOCK” is shown for the locked user data.
[F2 (PREVIEW)] Previews (auditions) the library data that is
selected in the list.
[F3 (NAME EDIT)] Accesses the NAME EDIT popup.
[F4 (RECALL)] Recalls the selected library data.
[F5 (STORE)] Stores the current settings into the selected
library data.
[F6 (CLEAR)] Clears the selected library data.
[F7 (LOCK)] Locks/unlocks the selected library data.
[F8 (CLOSE)] Closes the popup.
1
2
3
4
M-480_e.book 102 ページ ２０１１年３月２日 水曜日 午前９時２０分