Cleaning
Edition BE210202
03.2022
Rondostar 5000
Operating manual
110
Pinch points can occur on adjacent bands, belts or chains as follows
(view from above or below):
• One side stationary, the other running
• Both sides running
Keep limbs and objects away from pinch points.
Areas that are difficult to access must be regularly freed of flour resi-
dues, dough scraps and dirt to maintain hygiene.
Cutting rollers may only be lowered when the safety guard is closed.
Due to the risk of injury at the sharp edges, cutting rollers must be re-
placed carefully and correctly. Wear suitable protective gloves to pre-
vent injuries. Cutting rollers that are outside the cutting point must be
placed in the holding brackets beneath the machine table.
33
3434
36
37
To Next Page
Loading...
