User Manual Roth EnergyLogic Touchline/Wireless
Parameter descriptions
86 P100011294 E
Parameter Description
P-35 Change service code for service menu.
● Factory settings: 1234
Operation
► Press sensor button . The display shows 1234.
► Press sensor button
or , to change the service code. Confirm each selected
digit with sensor button
.
► Select one of the following options:
– Press sensor button , to save the changed settings. The display shows the
next parameter P-36.
– Press sensor button , to interrupt the procedure. The display shows the se-
lected parameter.
NOTE
In order to avoid unwanted access to the service parameters, the service code
should be changed and safely documented by the installer.
P-36 Change access code for public spaces.
The access code for public spaces is independent from the service code protecting
the service menu. The access code is only active if parameter P-47 is activated.
● Factory settings: 1234
Operation
► Press sensor button . The display shows 1234.
► Press sensor button
or , to change the access code. Confirm each selected
digit with sensor button
.
► Select one of the following options:
– Press sensor button , to save the changed settings. The display shows the
next parameter P-37.
– Press sensor button , to interrupt the procedure. The display shows the se-
lected parameter.
NOTE
The access code has to be changed in order to avoid unwanted access.
P-37 Activate or deactivate "summer-/wintertime".
If time and date are synchronized through the LAN-connection, then the automatic
summertime / wintertime adaptation must be deactivated.
● Factory settings: Option "0"
● Options:
– 0: activate
– 1: deactivate
Operation
► Press sensor button . The display shows 0.
► Press sensor button or , to select option 0 or 1.
► Select one of the following options:
– Press sensor button , to save the changed settings. The display shows the
next parameter P-38.
– Press sensor button , to interrupt the procedure. The display shows the se-
lected parameter.
To Next Page
Loading...
