Ruijie Reyee RG-RAP Series

Web-based Configuration Guide System Settings
173
Table 5-4 v3 Group Configuration Parameters
Parameter
Description
Group Name
Indicates the name of the group.
1-32 characters.
Chinese characters, full-width characters, question marks,
and spaces are not allowed.
Security Level
Indicates the minimum security level (authentication and
encryption, authentication but no encryption, no
authentication and encryption) of the group.
Read-Only View
The options under the drop-down box are configured
views (default: all, none).
Read & Write View
The options under the drop-down box are configured
views (default: all, none).
Notification View
The options under the drop-down box are configured
views (default: all, none).
Caution
A group defines the minimum security level, read and write permissions, and scope
for users within the group.
The group name must be unique. To add a view, click Add View.
(3) Click OK.
4. Configuring v3 Users
 Prerequisites
When the SNMP version is set to v3, the v3 group configuration is required.