29
(2) Log in to the Eweb of a device on the target network. In Network mode, choose
Devices and make sure that the new AP is online.
(3) Unplug the Ethernet cable, power off the new AP, and install it as planned.
(4) Log in to the Eweb of a device on the target network. In Network mode, choose
Devices > AP. Make sure that the new AP is online and the corresponding entry
contains icon in the Relay Information column. The icon indicates that
wireless backhaul is performed through the 5 GHz radio.
Click View Details following the icon to obtain information about the
uplink device and RSSI.
To Next Page
Loading...
