Samsung DCS-816 - Page 119

SAMSUNG Programming
DCS-816 February, 1999
MMC 423 (Page 1 of 1)
MMC: 423 S/T MODE
DESCRIPTION:
Allows the system to choose the function of each BRI access. You can set a BRI
access as "TRUNK" to which an ISDN C.O. line is connected, or as "STATION"
to which an ISDN terminal is connected.
NOTE
Any change made in this MMC will take effect only after restarting the BRI card. Use MMC 418 to
restart the card.
For each BRI access, two adjacent ports are assigned. You need only change
the value for one of the two ports; the value for the other port will be changed
automatically.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 423
Display shows
[701] S/T MODE
TRUNK
2. Dial BRI trunk number (e.g. 703)
OR
Press UP or DOWN key to select the port
Press the RIGHT soft key to move the cursor
[703] S/T MODE
TRUNK
3. Press UP or DOWN key to make selection
(TRUNK or STATION) and press RIGHT soft
key
[703] S/T MODE
STATION
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: TRUNK
RELATED ITEMS: MMC 418 Card Restart
MMC 419 BRI Option
MMC 424 S0 Mapping